Drywall
bullnose outside corner mouldings
for
baseboard, chair rails and crowns.
Click
for RADIUS CORNER BASE
Click for RADIUS
CORNER CROWN
Click for RADIUS CORNER CHAIR RAILS
How to deal
with rounded drywall outside corners.
Rounded bullnose
corner beads on the outside corners of sheetrock,
drywall
and plaster walls are now being widely used. While
this
softer treatment of a 90 degree outside corner is visually
pleasing,
it is hard to find moldings that properly wrap
around the corner with
that nice curved effect.
Because of this availability problem most installers end
up just making miter cuts on the straight mouldings to make
a faceted or pointed outside corner. This
leaves a gap between
the
molding and the curved corner bead that they then fill with caulk.
While
this type of installation works it is not the best
solution
for wrapping baseboards, chair rails and crown
mouldings
around these bullnose radius corners. At best
it tends to look somewhat unprofessional and at worst the caulk
filler dries out over time leaving a recess where dust and dirt collect.
We
also make baseboard and chair rail mouldings for
these rounded
outside wall corners. We supply these
components
with 3" to 4" long straight legs just as
on the crown moulding
above. While this makes for
a somewhat more
expensive corner moulding the
extra cost is offset by a
noticeable labor savings.
Since our corner
moulding goes all the way around
the corner and several inches
down the adjoining wall
on either side it allows for a
straight foward joint between
the corner and straight length
components.
B.H. DAVIS COMPANY
PO BOX 70 / GROSVENORDALE, CT 06246
PHONE: (860)923-2771 FAX: (860) 923-3495
Call, fax or
email us
with
your questions, comments and price quote requests.